To a Wild Rose Swap Cards

There are so many wonderful new stamp sets in the 2019-2020 New Annual Catalog… one of my favorites is ‘To A Wild Rose’ stamp set inspired by Million Sales Achiever Mary Ellen Byler.  This stamp set is wonderful just like Mary Ellen.

I love creating with this stamp set for many reasons… it’s versatile, it’s a Distinctive Stamp Set which don’t require coloring and it’s a two-step (three-step) stamp set which is layering multiple stamped images to create a detailed image.

I used the stamp set to create several of my new catalog swaps (made multiple of the same card to swap with other Stampin’ Up! demonstrators).

By using the Stamparatus and the same color ink for the flower image and leaf image I was able to create three different flower images for three different swap cards. 

www.CreateWithTerriGaines.comwww.CreateWithTerriGaines.comwww.CreateWithTerriGaines.com

 

Check out my video below for how I created the three flower images using the Stamparatus.

Note: My videos are unedited and may contain bloopers (misspoken words or technical errors).

Swap Card #1:

www.CreateWithTerriGaines.com

Supplies:

♥ Bundle (Stamp Set & Dies): To A Wild Rose Bundle (*151073 – photopolymer)
♥ Stamps: To A Wild Rose (*149452 – photopolymer)
♥ Ink Pad: Rococo Rose (150080), Mint Macaron (147106), Smoky Slate (147113)
♥ Cardstock: Basic Gray (121044), Smoky Slate (131202), Whisper White (100730)
Tools / Misc: Stamparatus (146276), Wild Rose Dies (*149547), Layered Leaves 3D Embossing Folder (152321), Rhinestone Basic Jewels (144220), Silver 3/8″ Metallic-Edge ribbon (144213), Bone Folder (102300), Paper Snips (103579), SNAIL (104332), Dimensionals (104430), Simply Scored Scoring Tool (122334), Die Cutting Machine
 
Measurements:  
♥  Basic Gray Cardstock: 5-1/2″ x 8-1/2″ scored at 4-1/4″
♥  Smoky Slate Cardstock: 4″ x 5-1/4″ 
♥  Whisper White Cardstock: 3-3/4″ x 5″ (for inside card), 2-3/4″ x 4″ (for sentiment cut with die), 4-1/4″ x 5-1/2″ (for flower & leaves)
♥  Ribbon:  about 14″ 
 
Instructions:

1.  Run 4″ x 5-1/4″ Smoky Slate Cardstock through Die Cutting Machine using Layered Leaves 3D Embossing Folder.  Wrap ribbon around bottom edge & tie into knot, then adhere to Basic Gray card front.

2.  Using Smoky Slate ink stamp sentiment on 2-3/4″ x 4″ Whisper White cardstock then cut using label die from Wild Rose Die set & Die Cutting Machine.  Adhere to card front with dimensionals.

3. Using Rococo Rose ink stamp flower images in one corner of 4-1/4″ x 5-1/2″ Whisper White Cardstock.  Using Mint Macaroon ink stamp leaf images in other corner of 4-1/4″ x 5-1/2″ Whisper White Cardstock. Cut images out with dies and die-cutting machine. Adhere to card front with SNAIL & dimensionals.

4. Embellish Flower with Basic Rhinestones.

www.CreateWithTerriGaines.com

5. Stamp inside sentiment on 3-3/4″ x 5″ Whisper White Cardstock and adhere to inside of Basic Gray cardbase.

Click here to download printable project sheet with instructions & dimensions for Swap Card #1.

www.CreateWithTerriGaines.com

 

Swap Card #2:

 

www.CreateWithTerriGaines.com

   

 

Supplies:

♥ Bundle (Stamp Set & Dies): To A Wild Rose Bundle (*151073 – photopolymer)
♥ Stamps: To A Wild Rose (*149452 – photopolymer)
♥ Ink Pad: Rococo Rose (150080), Mint Macaron (147106), Sahara Sand (147117)
♥ Cardstock / Paper: Rococo Rose (150882), Whisper White (100730), Woven Threads Designer Series Paper (149497)
Tools / Misc: Stamparatus (146276), Wild Rose Dies (*149547), Subtle 3D Embossing Folder (151775), Pearl Basic Jewels (144219), Bone Folder (102300), Paper Snips (103579), SNAIL (104332), Dimensionals (104430), Simply Scored Scoring Tool (122334), Die Cutting Machine
 
Measurements:  
♥  Rococo Rose Cardstock: 5-1/2″ x 6-7/8″ scored at 4-1/4″, 2-1/4″ x 6″ scored at 3″
♥  Whisper White Cardstock: 3-3/4″ x 5″ (for inside card), 2″ x 2-3/4″ (for  outside sentiment), 4-1/4″ x 5-1/2″ (for flower & leaves)
♥  Designer Paper: 2-3/8″ x 5-1/4″
 
 
Instructions:

1.  Run right side of 4″ x 5-1/4″ Whisper White Cardstock through Die Cutting Machine using Subtle 3D Embossing Folder. Fold 2-1/4″ x 6″ Rococo Rose on 3″ scored line then adhere left panel to right side of 4″ x 5-1/4″ Whisper White Cardstock. Adhere to Rococo Rose card base.

2.  Adhere 2-3/8″ x 5-1/4″ Designer Paper to Rococo Rose Card front.

3.  Using Sahara Sand Ink stamp sentiment on 2″ x 2-3/4″ Whisper White cardstock then adhere to front panel of small folded card. 

4. Using Rococo Rose ink stamp flower images in one corner of 4-1/4″ x 5-1/2″ Whisper White Cardstock.  Using Mint Macaroon ink stamp leaf images in other corner of 4-1/4″ x 5-1/2″ Whisper White Cardstock. Stamp outline images for flower & leaves with Sahara Sand Ink. Cut images out with dies and die-cutting machine. Adhere to card front with SNAIL & dimensionals.

5. Embellish Flower with Basic Pearls.

6. Stamp inside sentiment on 3-3/4″ x 5″ Whisper White Cardstock and adhere to inside of Rococo Rose cardbase.

Click here to download printable project sheet with instructions & dimensions for Swap Card #2.

www.CreateWithTerriGaines.com

 

 

Swap Card #3:

 

www.CreateWithTerriGaines.com

 

Supplies:

♥ Bundle (Stamp Set & Dies): To A Wild Rose Bundle (*151073 – photopolymer)
♥ Stamps: To A Wild Rose (*149452 – photopolymer)
♥ Ink Pad: Rococo Rose (150080), Mint Macaron (147106)
♥ Cardstock / Paper: Rococo Rose (150882), Whisper White (100730), Woven Threads Designer Series Paper (149497)
Tools / Misc: Stamparatus (146276), Wild Rose Dies (*149547), Layered Leaves 3D Embossing Folder (152321), Pearl Basic Jewels (144219), Bone Folder (102300), SNAIL (104332), Dimensionals (104430), Simply Scored Scoring Tool (122334), Die Cutting Machine
 
 
Measurements:  
♥  Rococo Rose Cardstock: 4-1/4″ x 8-1/2″ scored at 5-1/2″
♥  Whisper White Cardstock: 4″ x 5-1/4″ (for inside card), 2-3/4″ x 4″ (for sentiment cut with die), 4-1/4″ x 5-1/2″ (for flower & leaves)
♥  Designer Paper:  2-3/4″ x 4″
 
Instructions:

1.  Run right side of 4″ x 5-1/4″ Whisper White Cardstock through Die Cutting Machine using Layered Leaves 3D Embossing Folder, then adhere to Rococo Rose card base.

www.CreateWithTerriGaines.com

2.  Using Rococo Rose Ink stamp sentiment on 2-3/4″ x 4″ Whisper White cardstock then cut using label die from Wild Rose Die set & Die Cutting Machine.  Adhere to card front.

3. Using Rococo Rose ink stamp flower images in one corner of 4-1/4″ x 5-1/2″ Whisper White Cardstock.  Using Mint Macaroon ink stamp leaf images in other corner of 4-1/4″ x 5-1/2″ Whisper White Cardstock. Cut images out with dies and die-cutting machine. Adhere to card front with SNAIL & dimensionals.

4. Embellish Flower with Basic Pearls.

Click here to download printable project sheet with instructions & dimensions for Swap Card #3.

www.CreateWithTerriGaines.com

 

Thank you for creating with me,

♥ Place an order with me and receive a Create with Terri Project Packet as a Thank You gift!  The larger your order the more packets you will receive!!! Click here to learn more about my Create with Terri Project Packets.

♥ Use my current Host Code when placing an on-line order (under $150) and receive an extra Thank You Gift (Stampin’ Up! Embellishments) from me.  Click here for details for placing on-line orders and current Host Code. 

Terri’s June 2019 Host Code is  AVF36VJ4

 

 

Stampin’ Up! Products for this project:(click product image(s) below for direct link to my Stampin’ Up! store)

 

Leave a Reply